Tech Portfolio

Discrete Cosine Transforms in a radix-2 block transform method enables true split and merge transform processing of equal sized data halves in the transform domain for enabling recursive merges and splits in transform domain without data degradation.

A method is used for producing nanoscale and microscale devices in a variety of materials, such as silicon dioxide patterned buried films.

A method for reducing intermodulation beams includes applying a beam-smearing phase distribution in addition to a beam-steering distribution for scanning to an array of antenna elements such that multiple higher-order intermodulation products are simultaneously reduced.

A method using an etchant and a laser for localized precise heating enables precise etching and release of MEMS devices with improved process control while expanding the number of materials used to make MEMS, including silicon-dioxide patterned films buried in and subsequently released from bulk silicon, as a direct write method of release of patterned structures that enables removal of only th

A computation efficient polyphase channelization system enables one of many user FDMA signals to be channelized through multiple FFT response frequency bands forming an aggregate frequency band where K-point FFT channels are greater than the decimation factor M to produce FFT overlapped responses that have a smooth aggregate response without disjointed band gaps for reduced distortion using a c

A direct sequence spread spectrum receiver includes a first spreading code generator for receiving a first channel signal spectrum spread by a first spread code, while a second group of receivers use a second spreading code, where the first and second codes are partially correlated, so that, the first group of receivers receive all messages communicated while the second group of receivers only

A method of determining communication link quality includes the steps of: providing communications stations (e.g., UHF communications satellites, base stations of a terrestrial cellular network) with beacon transmitters that are used to transmit two types of signals from each communications station; and providing a communications device that employs the communications stations with beacon recei

A power controller in a communication system adjusts the transmitted power level using adaptive prediction of channel fading for maintaining the power level for improved communications by using an adaptive nonlinear predictor that explicitly takes into account the propagation delay and channel fading where the transmitted power is determined on the basis of the measurement of the received power

An acoustical mechanical test method prescribes compressing brittle balls in spherical conforming opposing platens producing equatorial bulging, tensile stresses, and resulting in crack or flaw growth with emissions of acoustical sounds for direct identification of brittle balls having a flaw exceeding a maximum allowable size, such as flaws in silicon-nitride balls used in hybrid bearings as w

Force diversion apparatus, methods and devices including the same result in rotational motion being imparted to an impacting object.

An inverter for use in connecting a DC power source to the utility grid includes a single DC-AC conversion stage, maximum (source) power tracking, and current control based on feed-forward compensation as a function of input power voltage error, rectified utility line voltage, and a scaled inverse of RMS utility line voltage.

A communications system reduces downconverter inaccuracies in time-domain measurements or samples of received microwave communications I and Q complex signals by converting received signal to baseband taking measurements or samples of the I and Q waveforms at differing phase shifts of a demodulating carrier signal for a local oscillator or carrier tracking loop used during downconversion so tha

A multithreaded processor is programmed for executing multiple simultaneous working programs by respective processor worker threads each executing the identical code having identical results for achieving redundant operations that can be compared to each other by one or more checker threads for determining when one of the working programs or checker threads has failed for a single event fault d

A laser beam detection and tracking system includes a focal plane array sensor providing pixel data and a field programmable gate array controller receiving the pixel data for determining a centroid of the illuminating spot of the impinging laser beam and for determining variably sized windows of interest disposed around the spot for selecting a subset of pixels of the array for communicating a

A parallel orthogonal frequency division multiplexed (OFDM) communications system includes a transmitter and receiver, the transmitter having a parallel fast Fourier transform (FFT) module operating in parallel to a conventional inverse fast Fourier transform (IFFT) module for providing respective orthogonal outputs received by the receiver.

A thin film solar cell thermal radiator configuration uses an embedded power bus to collect vertically migrating waste heat from electronic devices mounted on a thin film multilayer printed circuit board.

An intermodulation product reduction or cancellation amplifier received two input signals that are split in quadrature wherein the inphase outputs are summed and then amplified as an inphase signal, and the quadrature outputs are fixed-phase phase-shifted, then summed and then amplified as a quadrature signal.

Reactive halogen-ion plasmas, having for example, generating chloride ions, generated from low-pressure halogen gases using a radio-frequency plasma are employed for producing low-friction carbon coatings, such as a pure carbon film, at or near room temperature on a bulk or thin film of a compound, such as titanium carbide.

Methods and systems for tracking signals with diverse polarization properties address both sensitivity and antenna tracking performance issues.

A compensating structure includes layers of non-uniform arrays of conductive patches configured to provide phase and/or amplitude distribution modification of feed primary patterns.

Polymer nanofibers, such as polyaniline nanofibers, with uniform diameters less than 500 nm can be made in bulk quantities through a facile aqueous and organic interfacial polymerization method at ambient conditions. The nanofibers have lengths varying from 500 nm to 10 .mu.m and form interconnected networks in a thin film.

An improved radiation dosimeter device in an improved radiation dosimeter system provides a DC analog output voltage that is proportional to the total ionizing dose accumulated as a function of time at the location of the dosimeter in a host spacecraft, so as to operate in a system bus voltage range common to spacecraft systems with the output being compatible with conventional spacecraft analo

Platinum (Pt) thin film heaters are deposited by a focused ion beam for semiconductor manufacturing of thermally tunable distributed feedback lasers. An exemplar 1.3 .mu.m InGaAsP/InP laser is integrated with a tuning element having a wide wavelength tuning range of 4.9 nm, that is, 857 GHz, with a small heater current of 13.0 mA.

An RF-discharge lamp stabilization system for preferred use in a Rubidium atomic clock, senses acoustic oscillations of plasma ions in the 20.0 kHz range to assess the performance of the lamp for determining radio frequency parameters of the lamp while the lamp is in operation and while the performance of an atomic clock is influenced by the plasma character, with lamp spectral outputs being ac